View our products
Contact us
Enquire into our products or send us any queries you may have
Sales form & details on purchasing
View some other sites which may be of interest to you

This Microphone Amplifier is ideal for location or studio recording. Because of it's compact size it is easily transportable for location recording and is very discrete in the studio or control room.
The features of this dual channel microphone amplifier consist of low noise and low distortion. It offers switched gain controls for high accuracy level setting (4 dB steps), one mic channel (channel 1), one dedicated D.I instrument input (channel 2) with balanced line level output and buffered output to amp (ideal for mixing live and D.I. guitar for fuller sound), level indication, high pass filter (switchable on channel 1 onyl), 26dB pads (switchable on channel 1 only) and 48v phantom supply (switchable on channel 1 only).
Frequency Response: 10Hz - 150KHz ± 0.25dB Gain Range:

22dB - 66dB in 4dB steps.
[pad in -4dB - 40dB]

Distortion: Less than 0.01%
Typ, 0.001% 1KHz @ +20 dBu o/p
High Pass Filters: 22Hz, 33Hz, 68Hz @ 12dB per octave (Channel 1 only)
Noise: 25 microvolts
[-110dB ref +20 dBu. Bandwidth 10Hz-18KHz input loaded 150 ohms, 32dB gain].
Level Indication: Red LED +18dBu
Green LED +15dBu
Can be pre-set for your operating level
Clipping Level:

+29 dBu

48v Phantom: Channel 1 only (Switchable) Ground Lift: Switchable
26dB Pads: Channel 1 only (Switchable) Connectors: IEC mains
Input - XLR x 1, Jack x 2 (DI Input)
Output - XLR x 2 (bal),
D.I. Input:

Channel 2 high impedance
[1.8 Meg Ohms]

Dimensions: 60 x 115 x 295mm (HxWxD)
D.I. Gain Range: Channel 2 only -4 > 40dB in 4dB steps Price: P.O.A.
If You wish to purchase this product please click on Contacts or Sales below.
If you wish to ask a question about this product please click on Contacts or Enquiries below.